An over the range microwave oven makes efficient use of space in your kitchen while also incorporating lighting and ventilation.
Installing over range microwave with vent.
Take out the motor and rotate it 90 degrees so that the fan motor now blows upward.
But often minor adjustments are needed to make the connection between microwave vent and the duct.
Over the range microwave installation instructions include templates to help position the mounting brackets.
Attach the transition piece to connect the oven to ductwork.
Install the outlet through the cabinets to exhaust fumes from the range.
Check that the template is level.
If you are building a new kitchen then make sure to install the vent through the wall and plaster it appropriately.
Watch the unboxing here.
Install your over the range microwave venting by inserting it into the hole you have just made from inside your kitchen to the outside.
Start with the wall template.
Over the range microwave installation guide start by installing the vent and cover the area with drywall.
If the duct installation has been correct the microwave s vent fitting should slide smoothly into the collar of the exterior vent cap.
The width of the cabinet should be equal to or slightly less than the width of the cabinet above the microwave.
Avoid using any standard duct tape use metal tape to conceal all the joints.
Line it up on the center line on the wall and tape it in place.
Make sure you pay close attention to your specific vent s.
Mark the screw holes.
Connect the metal ductwork to the vent opening on the microwave.
For installing a vented microwave you might need to do some transition to connect the vent through the ductwork.
After you make sure you have the supplies you need for installation double check that your microwave will fit properly above your range.
Use the mark of your stud location to mark a screw hole over the stud.
Modify the cabinet over the stove to allow the duct to pass through by cutting holes on the top and bottom.